Ball Bearing
Roller Bearings
Precision Machine Tool Bearings
Liner Bearings
Automotive Bearings
Water Pump Bearings
Insert Bearing Units
Forklift Bearings
One Way Clutch Bearings
Plain Bearings and Rod Ends
Unground and pressed Steel Bearings
Track Rollers Bearings
Balls
Rollers
Universal Joints
Others
Non-standard
Metal Stamping
Transport Parts
Auto Parts
Others
Polishing
Investment Casting
Sand Casting


HFl, HFl..KF, with plain bearing
(HFL 0308 KF,HFL 0408KF,
HFL 0615KF,HFL0615)
HFL,HFL..KF,with rolling bearings
(HFL 0822 KFR,HFL 0822R)
(Fw >= 8mm and C>=22mm)


Dimension table.Dimensions in mm
Shaft
diameter
Plastic springs
Designation
Steel springs
Designation
Mass

g
Designation     Basic load
ratings 4)
Fw D C
-0,3
r
min
nGW2)

min-1
nGA2)

min-1
dyn.
C
kN
stat.
Co
kN
3 HF 0308KF - 1,4 3 6,5 8 0,3 45000 8000 - -
4 HFLl0408KF - 1,6 4 8 8 0,3 34000 8000 - -
HFL0408KFR - 1,6 4 8 8 0,3 34000 8000 - -
6 HFL0606KFR - 1 6 10 6 0,3 23000 13000 - -
HF L0615KF HF 0615 4 6 10 15 0,3 23000 13000 - -
HFL0615KFR HF 0615R 4 6 10 15 0,3 23000 13000 - -
8 HFL0806KFR - 2 8 12 6 0,3 17000 12000 - -
HFL 0822KF HF 0822 7 8 12 22 0,3 17000 12000 3,5 4,1
HFL0822KFR HF 0822R 7 8 12 22 0,3 17000 12000 3,5 4,1
10 - HF 1022 8 10 14 22 0,3 14000 11000 3,75 4,65
12 - HF 1226 18 12 18 26 0,3 11000 8000 5,8 6,7
14 - HF 1426 20 14 20 26 0,3 9500 8000 6,3 7,8
16 - HF 1626 22 16 22 26 0,3 8500 7500 6,9 9
18 - HF 1826 25 18 24 26 0,3 7500 7500 7,4 10,2
20 - HF 2026 27 20 26 26 0,3 7000 6500 7,9 11.4
25 - HF 2530 44 25 32 30 0,3 5500 5500 9,8 14
30 - HF 3030 51 30 37 30 0,3 4500 4500 10,8 16,9
35 - HF 3530 58 35 42 30 0,3 3900 3900 11,4 18,8
 

(1 Limiting speeds for both grease and oil lubrication.
(2 Limiting speed for rotating shaft.
(3 Limiting speed for rotating outer ring.
(4 Drawn cup roller clutches with rolling bearings (from 8 mm shaft diameter).
(5 No arrow on end face.
 
HFL 0606 KFR5), HFL 0806 KFR5) HFL 0408KFR, HFL0615R,
HFL0615 KFR

    Back




Copyright 2005, All rights reserved. Designed & Supported By Haibo Network Inc.