Machine Parts
Radial bearings with stud, for inclined mounting
This series of radial cylindrical roller bearings are especially thought for all those applications   where self holder-up systems for axial loads are provided.
The main stud, on which they are mounted, is made of high strength steel with very good   welding properties. It is carefully manufactured and represents a big help for the end users of   these bearings to make their application easier.
These radial bearings can be supplied both long life lubricated with water repellent, mineral-oil-
  base grease, suitable for high pressure and low speeds and with labyrinth seals. This means   that republication has to be made through the lubrication hole in the middle of the stud to be   welded.
The rolling elements of these bearings are of the same type as those used for combined   bearings described. This enables us to keep better costs and therefore to be more competitive.
These bearing are mainly used in the carriage of the masts in retractable lift trucks, in   combination with slides in antifriction material.

(1) References

  1  2    BACK
Copyright 2005, All rights reserved. Designed & Supported By Haibo Network Inc.