Bearing
 
   
 
 
 
 
   
   
   
   
   
   
   
   
   
   
Fasteners
   
Machine Parts
   
   
   
Casting
   
   
 
 
The combined bearings are manufactured according to the Unified Parameters which govern a correct execution of rolling bearings.
(This series can be supplied both with a retaining cap and they can therefore be re-lubricated and in the sealed performance.) The outer rings are normally scheduled in correct convex performance to counteract the inevitable geometrical errors originating from the coupling with the guide ways in which they roll.
Bearings are greased at source with grade "3" lithium base grease. For special performances, as the use of these bearings at high temperatures, please inquire our engineering office.



(1) Non relubricable
(2) Bearing with O.D.62.5 on request designation MR.430
(3) Relubricable bearing on request designation MR.1195
(4) References


1  2     BACK
 
 
Copyright 2005, All rights reserved. Designed & Supported By Haibo Network Inc.