Machine Parts
China DHK Group was established in 2001. We are ISO-9001 certificated company. We focus stable high quality and professional service as well as reasonable price. Supported by our very strong & professional engineering team and good equipped quality research center, we are the right company to supply our customers with very stable high quality products, angular contact ball bearing, automotive bearing and professional service. Also we are no problem to fully understand and develop custom requirement. We control our production, angular contact ball bearing, automotive bearing and quality process according to ISO standard and also no problem to follow PPAP III. We always submit samples according to ISIR. We are exporting more than 70% of our products, angular contact ball bearing, automotive bearing to both Europe and USA, some of them go for OEM customers like GE, GM, Ford, etc.

Single-row/Duplex Angular
Contact Ball Bearings

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.The bearings are nonseparable.The balls are inserted utilizing a counter-bore construction which allows a larger number of balls to be installed than in the case
of deep-groove ball bearings.

Single-row angular contact ball bearings can sustain radial, axial or moment loads,however, any axial load must be applied in one direction.Due to their design, angular contact bearings will experience some amount of axial loading from any radial load that is applied.For this reason, they are often used in pairs. DHK probides the various combinations with preadjusted clearacne to simplify assembly.

Support width max mid -
Load capability
stiffness max mid -

Series Bore diameter(mm)
Angle 30?? Angle 40??
7000(A) - 10 - 240
7200(A) 7200B 10 - 240
7300(A) 7300B 10 - 240

Typical Applications:
Speed Reducers,Automotive Applications, Construction Equipment,Pumps,Printing Presses,Paper Mill Machines

Double-row Angular Contact
Ball Bearings

Typical Applications:
Magnetic Clutches, Crank Shaffs, Pulleys, and Escalators.

Series Bore diameter (mm)
Angle20?? Angle30??
5200 10~110 10~110
5300 10~110 10~110


Copyright 2005, All rights reserved. Designed & Supported By Haibo Network Inc.